Replace traditional sand-cement plaster with XTERIOR PLAST. Experience a faster application, consistent quality, and a super-smooth finish that saves time, water, and cost.
Projects Completed
Material Delivered
Client Satisfaction
Liters Water Saved
XTERIOR-PLAST is a next-generation 53 GRADE OPC CEMENT-based Wall plastering designed to replace traditional sand-cement plaster. It is faster to apply, more consistent in quality, and delivers a super-smooth finish.
Saves massive amounts of water
Zero shrinkage formulation
Less material, more coverage
Adheres to any substrate
| Feature | Traditional Site-Mix | XTERIOR-PLAST |
|---|---|---|
| Mixing | Manual/Spade (Inconsistent) | Machine/Factory (Precision) |
| Curing | 10-14 Days Water Spray | Self-Curing (No water needed) |
| Cracks | High risk of shrinkage & cracks | Crack-resistant (Polymer flex) |
| Waterproofing | Absorbs water | Hydrophobic (Repels water) |
| Paint Ready | 21-28 Days | 7 Days |
| Wastage | 15-20% (Sand/Cement loss) | < 2% (Ready-mix accuracy) |
| Appearance | Grey |
| Binder | Ordinary Portland Cement & Engineered Polymers |
| Filler | Graded silica sand or M sand |
| Auxiliaries | Additives to enhance workability, water retention, high adhesion |
| Water Powder ratio | 0.22 to 0.25 (percentage) |
| Wet Density | 1800-1900 Kg/m³ |
| Dry Density | 1600-1700 Kg/m³ |
| 28 Days Tensile Adhesion Compressive Strength |
|
| Pot life | 1 hour at 27 Deg |
| Coverage | Approx. 0.7-1 sq. ft. per Kg (at 8-12mm thick). Depends on wall undulation. |
| Thickness | 8-12 mm |
Clean surface from dust, oil, and foreign materials. Patch up defects before plastering. Avoid stagnant water.
Mix 40kg bag with 8.5-9L clean water. Use an electric mixer for 3-5 mins until homogeneous paste is achieved.
Apply with steel trowel. Ensure underneath layers are dry if doing multiple coats. Up to 20mm thick in two coats.
Get Tools
Clean Wall
Mix (9L/40Kg)
Apply 2 Coats
"Switching to Xterior Plast saved our project weeks of curing time. The finish is incredibly smooth, and we haven't seen a single hairline crack."
Lead Architect
"The water savings alone make this product worth it. The German polymer formulation actually delivers on its promise of superior bonding."
Project Manager
"Our masons found it very easy to mix and apply. The thin bed application means we use less material but get a stronger, better-looking wall."
Civil Contractor